Article Number 200109, November 2001

STATUS OF BIOMASS GASIFICATION FOR POWER PRODUCTION
SPLIETHOFF, Hartmut

(PDF article, 663 kB)

The size of the document is nearly 663 KB and it may take few minutes to appear on Acrobat window if you have a slow connection. Please be patient.

ABSTRACT:

The most commonly used gasification technologies are fixed bed and fluidized bed gasifiers. Fixed bed gasifiers are employed in the low-capacity range of some MW_th, fluidized bed installations, typically in the range above 5 MW_th.

The gas produced in the gasifier can be used in various ways for electricity production or for the production of process heat. The systems differ with respect to efficiency, costs, and demand on the gas quality. Engines are suited for electric capacities between ca. 50 kW_e and 10 MWe in connection with atmospheric fixed-bed gasifiers. From a capacity of about 5 MW_e gas turbines, often in combination with a fluidised bed gasifier, are an alternative. In order to avoid fouling and deposits in the engine, the gas should be to a large degree tar- and dust-free. The requirements for fuel cells are more stringent, however a clear concept about allowed concentrations in the product gas is not yet available.

The gasifiers available on the market today exceed the indicated values by far when operated without gas cleaning. The removal of both tar and particles is therefore a requisite. The use of the product gases for thermal purposes does not make such high demands on the quality regarding tar and dust content. So for those applications it is not necessary to provide for a special gas cleaning.

Key Words: Biomass, gasification, fixed bed, fluidized bed, tar

Corresponding Author:

SPLIETHOFF, Hartmut
Delft University of Technology
Section Thermal Power Technology
Mekelweg 2
2628 CD Delft
THE NETHERLANDS

Tel.: + 31 (0)15 278 60 71
Fax: + 31 (0)152 78 24 60
E-mail: Click here to send an e-mail message (IFRF Exchange member).